Waterbased Epoxy Garage Flake Flooring Clear Top Coat 8L

Slip Resistance

Epotread W50 allows you to tailor the level of slip resistance to suit your needs. When applying fewer coats (one or two), more of the flake texture remains exposed, providing a naturally higher level of grip.

More coats will create a smoother, easier-to-clean finish but will reduce surface texture and grip.

How The Epotread Flake System Works

Step 1: Apply the first primer coat of Epotread 1000 – Flake Floor Base Coat thinned 20% with water. This will create a long-lasting bond between the coating and the concrete substrate

Step 2: Apply second coat of Epotread 1000 – Flake Floor Base Coat

Step 3: While the second coat of Epotread 1000 is still wet broadcast the decorative flakes evenly across the surface

Step 4: Once the basecoat has cured and the flakes are securely bonded remove the excess flakes using a soft broom, wide scraper, or leaf blower

Step 5: Apply 2-3 top coats of Epotread W50 – Clear Flake Floor Top Coat. the top coats locks the flakes in place, seal the surface, and provide a smooth, durable finish.

Product Features

• Easy 1:1 mix ratio
• Waterbased and low VOC – no strong odours or harsh fumes
• Excellent chemical resistance
• Clear finish enhances decorative flake colours
• Hardwearing for long-lasting protection
• Suitable for use on epoxy flake floor systems
• Helps create a seamless, easy to clean surface
• Adjustable slip resistance depending on number of coats

Uses 

• Top coats over decorative flake floor system
• Garage and workshop floors
• Retail and showroom spaces
• Commercial kitchens and food preparation areas
• Residential interior floors
• Industrial and warehouse floors
• Hospitality, healthcare, and education facilities

Coverage

• Apply at a rate of 8-10 square metres litre/coat. Two or three coats are required to achieve desired finish.
• Coverage rates may vary depending on the porosity of the substrate.