Uniseal Acrylic Sealer & Undercoat 10L

USES:

As a Sealer for Uniseal or other modified cements, bricks, cement plaster, concrete blocks, fibre cement sheeting, and as an Undercoat on exterior primed timber. For interior use as a Sealer Undercoat on Gib-board, insulation board, plaster, along with sealing Spraytex and all types of existing Textured Ceilings.

APPLICATION:

On concrete in hot tropical climates, dilute first coat using 50% clean water – to ensure penetration adhesion.

Other areas we recommend the application of 1 coat followed by the finishing coats.

Apply by brush, roller, conventional or airless spray. Ready for general use – reduce with water to spray (approximately 15% with water).

DRY TIME @ 15oC:

Touch Dry – 15 minutes – 1 hour Recoat – 3-4 hours

(Temperature must be above 10oC during application and dry time.)

COVERAGE:

2-4 m2 per litre over Uniseal, Stucco, etc.

6-10 m2 per litre per coat, depending on surface porosity over other substrates

PACKAGING: 500mls, 1, 2, 4, 10 Litre pails

CLEAN UP: Water