Nationwide Delivery & Pick up option from Auckland Store

No products in the cart.

No products in the cart.

100% Secure Checkout!
Need Help? Call Us

Eternabond Roof Seal Tape White 150mm x 15.2m

Product Code: M1000008 Categories , , , , Brand:

$220.00 excl. GST

Out of stock

Eternabond  RoofSeal tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. RoofSeal seals to itself so it can be cut and folded around an object.

Perfect for repairing and restoring roofs on mobile homes and RVs.

RoofSeal bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, aged PVC, CSPE/Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

For use on virtually all roofs, RoofSeal features a UV stable backing that is available in Black, Gray, Tan, and White. With the exception of surface prep, RoofSeal is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal remains flexible to temperatures as low as -56.7°C making it virtually impossible to thermally shock the seam causing a leak.

RoofSeal utilizes EternaBond’s advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built in primer. It is bonded to a UV stable backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.

Surface Preparation

Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

How to Apply Eternabond Roof Seal Tape

Install RoofSeal over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or a steel roller to activate bonding process. This material may be applied to clean dry surfaces from 65.6°C to -28.9°C ambient. Treat surface with EternaPrime for installations from 4.4°C to -28.9°C ambient.

Technical Data


Weight 9 kg

Related Products