No products in the cart.

100% Secure Checkout!
Sale

EternaBond Alumibond Tape 100mm x 15.2m

$153.04 excl. GST

Save: $41.96 (21.5%)

or 4 fortnightly payments of $38.26 with Afterpay More info

AlumiBond is a high grade aluminum foil with a hybrid EternaBond Sealant. Fuses to rigid ductwork. Will never harden, crack or peel and fall off like other duct sealing products. Lasts as long as the ductwork!

AlumiBond tape is designed for use on

  • metal buildings,
  • trailer/RV / motor homes roofs and sides,
  • drain pans, drain pipes,
  • duct-work,
  • boats, canoes, and as a protective coating for surfaces where abrasion and corrosion resistance is required.
  • AlumiBond seals to itself so it can be cut and folded around an object.

We will be closed whilst at Alert Level 4. Click & Collect will not be available. Essential goods can be ordered for courier delivery during Alert Level 4 (please indicate that your order is essential in the Order Notes in check out). Our customer services teams are ready to assist – the best way to get in touch is via our phone 09 391 0200 or the Contact Us Page.

For use on virtually all roofs, walls, floors, gravity tanks, troughs, etc. UV stable and moisture tight, AlumiBond creates an air and vapor barrier. The thick 4 mil aluminum backing combined with EternaBond’s advanced MicroSealant™ creates a hard surface.
AlumiBond bonds to a wide range of materials including carbon steel, aluminum, galvanized steel, aluminum foil, gypsum board, wood, rubber, tar, polyethylene, polypropylene, polystyrene, fiberglass, brick, concrete, masonry, rubber, thermoplastics, single-ply roofing, etc. AlumiBond remains flexible to temperatures as low as -70° F making it virtually impossible to thermally shock the roof causing a leak.

Surface Preparation

Surface must be clean and dry. Moisture, dust, dirt or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

Application

Install AlumiBond over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or steel roller to activate bonding process. This material may be applied to clean dry surfaces from 150° F to -20° F ambient. Treat surface with EternaPrime for installations from 40° F to -20° F ambient.

Technical Data

 

Related Products