This product is a fast-drying, clear solvent based acrylic resin sealer to enhance special concrete finishes such as exposed aggregate, tinted concrete and pavers and reduce weathering.
This product is also an economical solution to dust-seal warehouse and storeroom floors.
- Fast drying (1 hour)
- Single pack, no mixing required
- Quality solvent based resin formula
- Low viscosity to ensure penetration
- Very durable
- Helps prevent moss growth
- High UV stability
- Exposed Aggregate concrete
- Water repellent surface for Brick, blockwork and stone
- Primer sealer for Duromastic AC
- Butynol coating
Coverage rates for this product will vary considerably, depending on the porosity of the surface and application.
Typical coverage is between 6-10 square metres/litre, per coat. One or two coats are recommended.
On very porous surfaces such as sandstone or Oamaru stone a third coat may be required.
Note: A permanent wet look may be achieved.