Self-adhesive waterproofing bond breaker bandage
Butyl Fleece Tape is and easy to use peel and seal tape with a fabric layer and butyl rubber adhesive. This is used to flash and seal various surfaces.
HOW TO USE
Butyl Fleece Tape must be applied to a clean, dry, smooth and dust-free surface. Cut the tape to the required length Peel the release liner that covers the adhesive side and position the sealing tape. Roll-press firmly the product when installing to avoid entrapment of air bubbles. Press with a roller or a cloth pad.
When connecting two tapes, use an overlap of at least 50mm
* Butyl Fleece tape must be protected from UV rays. Not to be used over expansion joints. Do not apply solvent based coating and adhesives directly on to the tape surface.
Butyl Fleece Tape is and easy to use peel and seal tape with a fabric layer and butyl rubber adhesive. This is used to flash and seal various surfaces.
Used in wet area waterproofing.