Ardex WPM002 Two Part Undertile Membrane 20Kg + 20Kg

A rapid drying, two-part waterproofing membrane specially designed for use under tiles.

• Advanced acrylic polymers – will not re-emulsify
• Rapid drying time, normally ready to tile in 16-24 hours
• Class III two component cementitious membrane that conforms to AS4858:2004 Wet Area Membrane (Ref: CSIRO Report 3879)
• Compatible with ARDEX tile adhesives
• Fibre reinforced – no need for reinforcing mat
• Low VOC content – meets Green Building Council of Australia Green Star IEQ-13 requirements
• Concrete, renders and screeds
• Wet area compatible fibre-cement sheet, plywood and plasterboard

Substrates:

• Concrete
• Renders and screeds
• Fibre cement
• Plasterboard
• Plywood
• Particleboard
• Permanent immersion

Location:

• Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic.
• Suitable for permanent immersion.

Surfaces:

• Floors
• Walls

Colours:

• Liquid – White
• Powder – Off white

Pack Size:

• 20kg liquid
• 20 kg powder

Coverage:

• 40kg unit covers approx 16m² to 24m² (2 coats)
• Floors 16m² (2 coats) D.F.T. – 1.2mm
• Walls 24m² (2 coats) D.F.T. – 0.8mm

Drying Times:

• Recoat time: 1-2 hrs
• Ready to tile: 16-24 hrs
• Full cure: 3 days