High Strength Tile Adhesive 25Kg

Mixtile MTA HS is cement based water-Proof tile adhesive for the thin or thick bed fixing of almost all types of tiles, such as ceramic wall and floor tiles, terrazzo, quarry, marbles and sand stones.

 

  • Thin or thick bed fixing
  • Excellent adhesion to even on non-pours substrates
  • Waterproof – permanent immersion does not affect adhesion
  • Can be used for external and internal purposes
  • Can Be used for tile on tile applications.
  • Excellent bonding even in damp conditions
  • Excellent resistance to water and humidity
  • Slump resistance
  • Easy and economical to use
  • Good pot life

SKU :

Category:

In Stock

NZ $65.00 $49.00 (excl. GST)

Save: $16.00 (24.6%)

or 4 fortnightly payments of $12.25 with Afterpay More info

uparrow uparrow

Products Details

HOW TO APPLY 

Coverage

Solid bed fixing: 3mm-6mm depth 5.5-11kg/m2 Notch trowel: smooth surface 2kg/m2 Instructions for use Mixtile MTA adhesive in a ratio of 6 to 7 litres of water per 25kgs bag and 4.5 to 5.5 for 20kgs Bag. Mix to a uniform lump-free Consistency. Leave for approximately 5 minutes to allow the

resins to completely dissolve. Moisten the support if necessary, but never the tiles. Mixing should by a force action mixer. Hand mixing is recommended for small Quantities only. 

Point to be noted: The open curing time of tile adhesive at 300c is approximately 30 minutes. Therefore, care should be taken in preparing the mortar. Prepare only the surface, which can be tiled within this time. Mix tile MTA adhesive should not be used on painted or metal surface. 

Application; Apply Mix tile MTAHS adhesive to a uniform thickness of 3mm to 6mm on the support to cover the slots on the back of the tiles, of an area of not more than 1m2 at a time.

For horizontal applications a solid bed fixing is recommended as well as for heavy-duty vertical applications.

For other vertical applications, use a toothed spatula to comb horizontally to remove excess. The trowel should have 6mm notches at 25mm intervals center to center.

Apply the tiles, press it, and smooth out carefully so that the mortar is spread evenly. If the bonding is perfect, the tile will not slide. The joints can be filled with Mix grout (available in grey, white or matching colours on request) 

CONSUMPTION 

Approximately 2kg/m2 depending on the support. Clean the tools with water after use. Store in dry conditions and protect against wind and rain.

You may also like